Files (3)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Choose the needed variant, then slice it for grams, cost, and print time.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Phone Holder for Porsches with Sport Chrono package
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
3 hosted model files
STL
Material start
PETG or ASA for durability in a car environment
Saved part guidance
Strength start
20-30% infill for a balance between rigidity and weight
Saved part guidance
Orientation / supports
verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
High cabin heat — validate PETG or choose ASA/ABS
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
This phone holder fits a Sony Xperia X. It is designed to be mounted via a suction cup to the chronometer of a Porsche with the Sport Chrono package. It thus does not obstruct any vents and the chronometer is useless anyway. Use the skeletized version if you want to save material and printing time. Use the solid version if you want more rigidity. The suction cup coupler is to be glued on. I used a UV activated glue for that. Placement of the coupler is easier to figure out on the skeletized version for obvious reasons. You need a suction cup like this one: https://www.aliexpress.com/item/4000623358671.html Based on Sony Xperia X bracket (thing:2368500).
Compatible Cars
Originally published on thingiverse.com by Michi Martini (michimartini) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Adapter Plate for Porsche Phone Mount 911SC, 930, 993 and 964
Phone Holder for Porsche 964 and 993
Porsche
Porsche - Phone mount in cup holder (79 mm width)
Porsche
Porsche - Phone mount in cup holder (69 mm width)
Porsche
Porsche - Phone mount in cup holder (74 mm width)
Porsche
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
