Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Kia.stl | Primary model | 64.2 KB STL | 11g $0.26 | 12g $0.28 | 26g $0.62 | Ensure proper bed adhesion to prevent warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Plug in the aerodynamic arch of the trunk KIA Sportage 2014
Need this part printed?
Tell us what you need and we'll help you get it 3D printed. Takes a minute — no account needed and no payment is collected.
Opens a quick request form. No order is placed and no payment is collected. Prefer email? Email us instead.
Description
A friend asked to print a cap in the railing on his Kia Sportage 2014. Of course, it was not possible to repeat the structure of the original stub perfectly))))) But as an alternative, it’s not very bad at all))))) Друг попросил распечатать заглушку в рейлинг на его Kia Sportage 2014. Идеально повторить структуру оригинальной заглушки конечно не получилось))))) Но как альтернатива вполне себе даже очень не плохо получилось))))).
Compatible Cars
Originally published on thingiverse.com by Maksim Pakhilo (kimana) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
