Files (4)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Choose the needed variant, then slice it for grams, cost, and print time.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Porsche 911 991 981 Wireless Charging tray
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
4 hosted model files
STL + STEP
Material start
PETG or ASA for durability in car conditions
Saved part guidance
Strength start
20-30% infill for a balance between weight and stability
Saved part guidance
Orientation / supports
verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
High cabin heat — validate PETG or choose ASA/ABS
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
I have a wireless Android Auto setup in my Porsche 991, and so I designed this tray to work with a high speed Anker wireless charger. It is sized for a Samsung S20+ with case, but I included STEP so you can modify to fit your phone. With a snug fit the phone basically falls into the right position without much work. Used with Anker 15W PowerWave Alloy Charging Pad: https://smile.amazon.com/Anker-Wireless-Charger-Fast-Charging-Adapter/dp/B07YD77RKC Right angle USB-C adapter (used with six inch cable that is barely long enough) https://smile.amazon.com/Adapter-Cellularize-Extender-Extension-Nintendo/dp/B0882RJRQS You will also need at least a six inch USB-C adapter and a 12V USB-c charger that supports Power Delivery in the accessory socket. There are two components, the main tray, and a tpu mat to place under it to prevent any scratches. Remove the rubber factory liner before installing both.
Compatible Cars
Originally published on thingiverse.com by Nicholas Nguyen (osunick) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Adapter Plate for Porsche Phone Mount 911SC, 930, 993 and 964
Phone Mount for Porsche 993 and 964
Porsche 911 997 Phone Mount Pixel 5
Porsche 911 996 986 Boxster Phone holder
Porsche 911 991 981 Wireless Charging Tray iPhone13Pro
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
