Renault Clio IV - Speaker Adapter 165mm

0 downloads82 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

Source link only

No hosted model files

Material start

PETG or ASA for durability and heat resistance

Saved part guidance

Strength start

20-30% infill for a balance between strength and weight

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Cabin/interior use; avoid high-heat zones

Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

Download at source

License & use

CC BY-NC

Link-only

Attribution required

Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

This is an adapter to mount 165mm speakers in the front doors of a Renault Clio IV - might be compatible with other models as well. It is designed to use M4 threaded inserts to mount the speaker to the adapter. It's a very tight fit, I heated the inserts and then screwed them in the holes. You first need to drill out the rivets to remove the original speaker. Now you can mount the printed speaker adapter with some screws and self locking nuts. There is a slot on the back side which is meant for the speaker cables to route through. I also used some silicone on the back to create a good seal between the adapter and the plate you are mounting it to. Once the adapter ist mounted the speakers can be screwed in with some M4 screws.