Files (2)
Based on 25% main infill for the largest likely-needed model file
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| middle_console_devider.stl | Accessory piece | 4.0 KB STL | 8g $0.20 | 9g $0.22 | 20g $0.47 | Small functional file: print slowly; consider 80–100% infill for durability. |
| middle_console_divider-v2.stl | Printable file | 336.2 KB STL | 18g $0.44 | 20g $0.48 | 44g $1.04 | Ensure a brim or raft is used for improved adhesion |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Renault Megane e-tech middle console divider
Need this part printed?
Tell us what you need and we'll help you get it 3D printed. Takes a minute — no account needed and no payment is collected.
Opens a quick request form. No order is placed and no payment is collected. Prefer email? Email us instead.
Description
This is a roughly created model. Feel free to use and adjust. If you do, please share. Note: The divider will be a bit loose in the front and will be a bit tight in the rear. Remember it is a rough model. update: v2 of the divider is much smoother. I recreated it in Fusion360.
Compatible Cars
Originally published on thingiverse.com by Onno Jansen (ofbjansen) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
