Renault Megane I Wiper Cover Wind Deflector clips 7700834097

0 downloads94 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

Source link only

No hosted model files

Material start

ABS or ASA for durability

Saved part guidance

Strength start

medium to high infill for strength

Saved part guidance

Orientation / supports

supports likely

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

UV/weather exposure — ASA is the starting point

Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

Download at source

License & use

CC BY-NC

Link-only

Attribution required

Safety/IP review

Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

These are the 2 plastic clips types found on the wiper cover wind deflector, the black plastic grille beneath the front wipers, in the lower part of the windshield. The grille (in 2 pieces) has plastic clips that easely brake and even if you buy a second hand grille, you would still find missing / broken clips. Unfortunately. Renault doesn't sell the clips separately. In fact, there are nowhere to be found.. Clip 2 has to be mirrored for left/right grille. Take care when orienting the piece in the slicer software, so you have the best strength. Print in ABS, without cooling fan. Supports are required. Hope it helps!:) The clips are tested and work perfectly.