Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| pok.stl | Primary model | 5.6 MB STL | Slice file | Slice file | Slice file | Ensure proper bed adhesion to prevent warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Renault scenic (96-03) door handle trim holder
Print this part
Check the available model and saved setup details before opening your slicer.
Files
1 hosted model file
STL
Material
PETG or ASA for durability in outdoor conditions
Print time
Slice to calculate
Filament
Slice to calculate
Supports
verify in slicer
Infill
20-30% infill for a balance between strength and weight
Difficulty
Not rated — inspect geometry
Vehicle heat
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
I've made this reproduction of the original one beacuse a friend of mine was in a hurry with his car (didnt pass OK the technical vehicle inspection). I've tested with him by myself and it works perfectly (and most important, did pass de TVI) so i decided to share it with all the community for help mechanics and 1996 to 2003 megane scenic owners. I've printed it with my custom made prusas in a low resolution profile and normal PLA. (0.3mm, 0.4 nozzle and 30%infill was OK for me) but feel free to try another different profiles. Diseñe esta pieza, reproduciendo la original,porque un amigo tuvo problemas al intentar pasar la itv de su scenic con la pieza rota. La probe con el y funciono perfecta, y ademas paso la ITV, asi que he decidido compartirla con vosotros, sobretodo para ayudar a mecanicos o propietarios de alguna renault scenic mk1 o mk2, la imprimi usando una de mis prusas caseras DIY a baja resolucion con PLA normal y corriente.0.3mm, 0.4 nozzle and 30%infil funciono perfecto pero podeis probar con algunas con mejor calidad.
Compatible Cars
Originally published on thingiverse.com by Alejandro Hernández Rosa (Xcustom3D) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Door handle trim Renault Scenic, Fluence 806470061R
Poignée renault espace 2
Clio 1 door handle support
Renault Megane-1 Door Handle Lever Clevis
Handle for Renault Espace
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
