Replacement for Tesla Model 3 hitch plug

0 downloads64 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

Source link only

No hosted model files

Material start

PETG or ASA for durability and heat resistance

Saved part guidance

Strength start

20-30% infill for strength and minimal weight

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Cabin/interior use; avoid high-heat zones

Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

Download at source

License & use

CC BY-NC

Link-only

Attribution required

Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

Especially for very short hitch cables the placement of the hitch plug at the tow bar is more than sub optimal. So I create a cable that allows the plug placement directly at the hook. Following additional parts are needed: * 1 x Lowering head screw 6x60mm (Top hook holder screw) * 1 x Lowering head screw 6x70mm (Bottom hook holder screw) * 3 x Screw 5x25mm * 1 x Hitch plug (for the car side) * 1 x Car plug (hitch side, I use Hella) * 1 x Cable (min. 9 wires) You can see at the photo, that my cable is too long. If you find an angle plug for the car side, it is possible to hide the whole cable under a cover with one hole.