Saab 93 'Vert Light Trim

After getting nowhere finding a simple trim piece for my Saab 93 convertible I decided to make one. Took a few hours but this fits perfectly. Saved me $50 from Ebay. Notes: 1- Unless you use better filament than PLA, you'll find this will break after popping it in and out a few times. 2- The paint color is hard to find on the fly. Lowes carries almond color spray paint that almost matches. Print a spare to test paint colors on. 3- If you print on the outward facing side down you'll have to sand and do a bit of fill work. It's almost best if you print on a side down using supports. YMMV. 4- Print this with as high of a resolution as you can. Lower resolutions make for weaker parts. 5- This specifically fits Saab 93 'verts between 99-03. I don't know if it'll work in any other model. The part numbers this replaces are 32022266 and 4510400. 6- If your light broke or you just want LEDs then I recommend 11mm side emitting LEDs like the ones in this link https://www.amazon.com/Side-View-LED-Bolt-Motorcycle/dp/B077QWB4N8. Just remove the spring and install them with the bulb trim off.This warm white is still a bit cooler in color than typical interior lights.