Files (6)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Choose the needed variant, then slice it for grams, cost, and print time.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Saleen Mustang Wheel Center Cap and Seat Handles
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
6 hosted model files
STL + STEP
Material start
PETG or ASA for outdoor durability
Saved part guidance
Strength start
20-30% infill for strength and minimal weight
Saved part guidance
Orientation / supports
verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
Replacement center wheel caps for mid-eighties Saleen Mustang created for a dealership in the process of restoring a fox body. The car was missing all but one center cap on the stock wheels, and after reaching out to Saleen and Ford with no luck, they decided on 3D printed replacements. Having one remaining wheel cap able to get the measurements from, I modeled a near exact replacement only changing the clip-in part and interior. Printed in ABS to withstand the elements. I also made replacement seat lever handles for the car. *The photo of the Mustang with the blue stripes is not the one I help with but has the same wheels. EDIT: I've included a shorter version of the wheel hub for the ARE 5 spoke wheels used on same era Saleen Mustang.
Compatible Cars
Originally published on thingiverse.com by Daryn Finney (DarynFinney) · License: CC BY-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
