Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| BevestigingsBeugelVoorAchterAangepast.stl | Primary model | 154.6 KB STL | Slice file | Slice file | Slice file | Use a smaller piece of anti-slip mat between the dashboard and the mount for protection and stability |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Samsung Galaxy S7 Dashboard mount for Opel Zafira
Print this part
Check the available model and saved setup details before opening your slicer.
Files
1 hosted model file
STL
Material
PETG or ASA for heat resistance and durability
Print time
Slice to calculate
Filament
Slice to calculate
Supports
verify in slicer
Infill
20-30% infill for strength and minimal weight
Difficulty
Not rated — inspect geometry
Vehicle heat
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
I needed a mount for my phone right behind the steering wheel. The place where I always have it in plain sight without blocking the view. Be aware that the temperature will get high on the dashboard. I printed it with ABS to withstand the heat and because of it strength when clipping the phone. I have placed a smaller piece of anti-slip mat between the dashboard and the mount to protect the dashboard from possible scratches and to prevent the mount from moving. Better safe than sorry.
Compatible Cars
Originally published on thingiverse.com by Maurice Beelen (Ambayonyx) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
iPhone MagSafe dock for Opel/Vauxhall Astra G
Astra J Phone Stand
Universal CD slot Device holder, phone holder.
Zafira C Tourer Phone Holder Basic (Mittelkonsole)
Brodit Kugelgelenk (ball joint)
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
