Files (3)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Seat Ateca & Moto G5 Plus
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
*Update August 8th* Simple telephone holder for Moto G5 Plus with use in Seat Ateca. Goal was to have a simple holder in which the telephone could be inserted and taken out easily. Ofcourse it should be able to fit when the powercord is plugged. There are two ways to attach your holder to your vent: Option 1 (recommended): Grip pen versie 8; to rotate the phone a bit towards the driver and tilt it a bit forward. Relies on friction to stick. Option 2 Grip pen versie 5; simple lock as published originally. Clips into the back of the vent. Both options have been printed and tested and turned out ok. I prefer option 1 as it positions the phone a bit better towards the driver. Although the grip pens stick into the holder quite ok, I recommend a tiny bit of glue. And don't print in PLA! Heat *will* deform your beautiful print, even in moderate climates. Second print (the white one) was done this PETG and turned out perfect. Happy printing!
Compatible Vehicles
Originally published on thingiverse.com by Frank (i6o6) · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
