Shifter Boot Bracket for BMW vehicles - image

Files (3)

Bracket_Final_Left_Hand_Drive.stl

STL

90.0 KB

Bracket_Final_Left_Hand_Drive_EXT.stl

STL

104.1 KB

Bracket_Final_Right_Hand_Drive.stl

STL

90.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Bracket_Final_Left_Hand_Drive.stl	Choose left variant	90.0 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
Bracket_Final_Left_Hand_Drive_EXT.stl	Choose left variant	104.1 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
Bracket_Final_Right_Hand_Drive.stl	Choose right variant	90.0 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Shifter Boot Bracket for BMW vehicles

0 downloads40 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

3 hosted model files

STL

Material

PETG or ASA

Print time

Slice to calculate

Filament

Slice to calculate

Supports

verify in slicer

Infill

20-30% infill for durability

Difficulty

Not rated — inspect geometry

Vehicle heat

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

Scanned the outline of the original Right Hand to crate a Left Hand, after 2 hours on modeling and measuring and 6 hours on printing finally have the best result. Perfect fit UPDATE ADD 7 more hours in in the left hand one witch after final print when i took it to the car it did not fit, so i had to go back to modifying it now both Right and Left Hand drive fit perfectly. Sorry if anyone had trouble with it.