Simple smartphone holder modules for Tesla Model 3 - image

Files (6)

Tesla_phone_stand_-_large_module.stl

STL

165.8 KB

Tesla_phone_stand_-_large_module_bracket.stl

STL

2.6 KB

Tesla_phone_stand_-_small_central_module.stl

STL

94.1 KB

Tesla_phone_stand_-_small_left_module.stl

STL

127.9 KB

Tesla_phone_stand_-_small_module_bracket.stl

STL

1.8 KB

Tesla_phone_stand_-_small_right_module.stl

STL

134.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

6 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Tesla_phone_stand_-_large_module.stl	Printable file	165.8 KB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to prevent warping
Tesla_phone_stand_-_large_module_bracket.stl	Mount / bracket	2.6 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Tesla_phone_stand_-_small_central_module.stl	Printable file	94.1 KB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to prevent warping
Tesla_phone_stand_-_small_left_module.stl	Choose left variant	127.9 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
Tesla_phone_stand_-_small_module_bracket.stl	Mount / bracket	1.8 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Tesla_phone_stand_-_small_right_module.stl	Choose right variant	134.4 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Simple smartphone holder modules for Tesla Model 3

0 downloads17 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

6 hosted model files

STL

Material

PETG or ASA

Print time

Slice to calculate

Filament

Slice to calculate

Supports

verify in slicer

Infill

20-30% infill for durability

Difficulty

Not rated — inspect geometry

Vehicle heat

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.