Files (3)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 18% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Tesla_logo_cover.stl | Cover / cap | 24.3 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
| TeslaMobileChargerHolder_-_CableHolder.stl | Mount / bracket | 1.6 MB STL | Slice file | Slice file | Slice file | Check orientation and supports in your slicer before printing |
| TeslaMobileChargerHolder_-_HandleHolder.stl | Mount / bracket | 1.6 MB STL | Slice file | Slice file | Slice file | Check orientation and supports in your slicer before printing |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Tesla Mobile Charger holder
Print this part
Check the available model and saved setup details before opening your slicer.
Files
3 hosted model files
STL
Material
PETG or ASA for durability in car conditions
Print time
Slice to calculate
Filament
Slice to calculate
Supports
verify in slicer
Infill
5-30% depending on the part's required strength
Difficulty
Not rated — inspect geometry
Vehicle heat
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
This cable and handle holders were designed to fit the Tesla Mobile Charger that ships with Model 3. I printed the holders on it's back and needed no supports. The printer used was Prusa Mini, print settings default 0.25 DRAFT profile with infill set to 5% for the cable holder (the big part) and 30% for the handle holder (to make it stronger). Both holders are fastened to the wall using a screw. I used 4.5x70mm screw for the big part (cable holder) and 4.5x50mm screw for the handle holder. The Tesla logo covers the hole on the big part. I used wall paint to paint the Tesla logo and letters so it "pops out" a little:) I used prusament galaxy black
Compatible Cars
Originally published on thingiverse.com by Miha Valencic (whydoweneedausername) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Tesla Model 3 / Model Y Console Key Card Holder
Tesla Model 3 Tablet Iphone Mount Mod
Tesla model 3 box for holding sunglasses
Tesla model 3 licenseplate holder european version (Nummernschildhalter)
Tesla model 3 Magsafe Seat Hook
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
