Skoda Fabia Gen1 Cup Holder

0 downloads81 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

Source link only

No hosted model files

Material start

PETG or ABS

Saved part guidance

Strength start

medium to high infill for durability

Saved part guidance

Orientation / supports

supports likely, verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Cabin/interior use; avoid high-heat zones

Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

Download at source

License & use

CC BY-NC

Link-only

Attribution required

Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

My friend broke a cup holder in his Škoda Fabia (1st gen) so I made him a replacement. Improved.:o) I printed this from CFJet (PETG with carbon), however regular PETG or even ABS also work. Few small supports are necessary (but only from buildplate). After the print I would recommend a bit sanding or even re-drilling the parts (especially knobs) to ensure everything have correct dimensions and is relatively smooth. It was difficult and complex design and it is not super easy to print correctly either. There is probably not many Škoda Fabia 1st gen users but let me know if you any need help or more information. Anyway it was very time-consuming design so feel free to tip me when you use this model.:o) https://youtu.be/29udHL65xPc