Skoda Fabia MK1 Console Phone Holder - image

Files (1)

ConsoleHolder.stl

STL

27.3 KB

Print plan

Exact totals not supplied

Print setup plan

Useful setup guidance without pretending STL byte size can predict filament, cost, or print time.

1 model file

Material plan

PETG / ASA

Published material guidance; still check heat, UV, load, and printer compatibility.

Starting setup

10% infill

A planning starting point only; wall count, orientation, and geometry often matter more than infill.

Final totals

Confirm in slicer

Slice the selected model with your final material, orientation, walls, and supports.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Reference shelf

Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon
ASA filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Unsure which one fits? Read the automotive filament guide.

Skoda Fabia MK1 Console Phone Holder

0 downloads5 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

1 hosted model file

STL

Material start

PETG or ASA for durability in car conditions

Saved part guidance

Strength start

cubic infill with 2-3 perimeters

Saved part guidance

Orientation / supports

verify in slicer, likely for bottom concave part and notch

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

CC BY-SA

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

This is a phone holder for guiliopierucci 's SKODA Fabia Console Phone Holder. The original model replaces the empty buttons below the warning lights button with a place where you can add different attachments. My phone holder is made to fit a Samsung A34 with a wallet style case. I have added the Fusion360 file for easier modification, as every phone & case combination will have different measurements. The G-code files below have been sliced for good orientation and strenght. Printing instructions for the Phone Holder: Cubic infill; 2-3 perimeters; 0.2 quality preset on the Mini+; Automatic Smartfill supports on overhangs only via the PrusaSlicer (basically supports should only on the bottom concave part and the notch behind that attaches to the console holder); Printing instructions for the Console Phone Holder: Print in the orientation as is, if you flip the model to reduce support material, the clasps can break when trying to insert or remove from the console; Automatic Smartfill supports on overhangs only via the PrusaSlicer (basically supports should only be done for the bottom concave part and the notch behind that attaches to the consol holder); Another model that you can print together with this one is Jan Tomášek 's Drinks Holder, which I also sliced to print myself.