Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| giro.obj | Primary model | 190.6 KB OBJ | 15g $0.36 | 16g $0.39 | 36g $0.86 | Ensure proper ventilation when printing with PETG or ASA |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Stop / Trurn indicator housing Critroen 2CV Citronnete Mehari
Need this part printed?
Tell us what you need and we'll help you get it 3D printed. Takes a minute — no account needed and no payment is collected.
Opens a quick request form. No order is placed and no payment is collected. Prefer email? Email us instead.
Description
Stop/parking signal use 3W star led on 1W (3*180Ohms parallel, 1W Each) for stop an 0.25W (180Ohms 1W, single) for parking (more power blind back drivers). Turn signal use 3W Yellow led on 0.5W ( 2*180Ohms parallel) Is recommended to place a low value capacitor in parallel with led (1uF no polarized) and a diode for reverse polarity protection. Seal with black silicone (fastix) to prevent moisture (no need to change a light for a lifetime of the assembly). Its optimal to use a switch-mode power supply for leds, but because of the low power compares to stock lights its no much sense to make further optimization but it improves consumption. Current efficiency with resistors is 34%. Use Silicone sealant to fix the LED to heat-sink, because of the low power involved is enough thermal efficiency.
Compatible Cars
Originally published on thingiverse.com by fvfilippetti Dndkdmd (filipp_morris) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
