Files (1)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Subaru (12mm x 1.25) Shift Boot Retainer
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
If you are using a round shift knob, you're often stuck with an ugly gap where the shifter comes through the shift boot. This is a little adapter I made because the ones from Amazon are expensive and I'm too impatient for shipping. Installation: Depending on how the print turns out, you may be able to slide the retainer on, or you might have to thread it on. After installing the retainer, add in the jam nut and use the retainer like a wrench to tighten it down. Then when you get the shift knob screwed all the way down, loosen the retainer back up again -- holding the shift knob in place -- until the jam nut is wedged up against the shift knob. Done!
Compatible Vehicles
Originally published on thingiverse.com by Jeremy WW (JezzaWalker) · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
