Files (1)
Based on 35% main infill across listed model files
Filament only at roughly $24/kg PETG / ABS
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ABS filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ABS; use an enclosure and suitable ventilation, and verify temperature requirements and seller. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Subaru Crosstrek 2018+ / Impreza 2017+ cupholder adapter for 40oz Takeya water bottle
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
1 hosted model file
STL
Material start
PETG or ABS
Saved part guidance
Strength start
20-50% infill for durability
Saved part guidance
Orientation / supports
Likely not needed
Exact totals
50 g · 2 hours
Saved estimate
Vehicle exposure
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
Michael ChenDescription
I had a first world problem: My oversized water bottle wouldn't fit in my new car cup holder. This is my solution. Print this in PETG, ABS or something with a high glass transition temperature or it WILL melt. Hope this is useful to somebody. Do not use PLA or the heat from inside your car will distort the shape quickly. Use PETG or something with a higher glass transition temperature. No supports are required, just print standing upright.
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Tamiya RC Subaru WRX STI Light Buckets
Subaru
Subaru WRX Washer Cap
Subaru
Subaru STI Wheel Center Cap
Subaru
Subaru Crosstrek GoPro Vent Mount
Subaru
Trailer Hitch Cover for Subaru Crosstrek
Subaru
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
