Files (2)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Subaru (EJ22 & EJ25) Seal Installer (Camshaft & Rear Cam Plug)
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
Subaru (EJ22 & EJ25) Seal Installer (Camshaft & Rear Cam Plug). 1) Camshaft Seal Installer: works great for installing the front camshaft seals on your engine without having to pull the heads or the engine. The cavity slips over the camshaft and you can just take a rubber mallet and tap in into place after pulling the old one. 2) Rear Cam Plug Installer: this STL works great for installing the "rear plug" seal on the back of the driver's side head and installing it to the appropriate depth, which is maybe 1.25 mm deeper than flush (for the edges, not the "head" of the seal), I can't remember right now. Driving this seal too deep can be a HUGE problem because it could block the oil channel that keep the rear part of your camshaft seal lubricated. Thus: I came up with this seal installer which gets it at the appropriate depth and is idiot proof. 3) If you are looking for something to help you install a rear main seal, I highly recommend this link: https://www.thingiverse.com/thing:3035057. (I would just recommend just printing the tapered press block and foregoing the other items in the print. You can use your torque converter bolts + the small plate that comes on your torque converter to slowly and evenly install the seal, the tapered press block design prevents you from installing the seal too far.) It's marketed as being for EJ25D but it worked fantastic for my EJ22T and all the rear seals for EJ22 and EJ25 are the same (and I believe EJ18 & potentially EJ20) so it should work if you have one of those engines.
Compatible Vehicles
Originally published on thingiverse.com by Conner Edwards (CGEdwards53) · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
