Mini_Shade_Clip.stl

STL

763.0 KB

Mini_Shade_Clip.stp

STP

231.6 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Typical selected file

27g

Based on 25% main infill for the largest likely-needed model file

Material cost

$0.65

Filament only at roughly $24/kg PETG / ASA

Print time

46m–1.3h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Mini_Shade_Clip.stl	Clip	763.0 KB STL	25g $0.60	27g $0.65	59g $1.43	Ensure a brim or raft is used for stability if necessary
Mini_Shade_Clip.stp	Clip	231.6 KB STP	16g $0.38	17g $0.42	38g $0.92	Ensure a brim or raft is used for stability if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

SunScreen Clip for Mini Cooper vehicles

0 downloads4 views0 likes

Need this part printed?

Tell us what you need and we'll help you get it 3D printed. Takes a minute — no account needed and no payment is collected.

Opens a quick request form. No order is placed and no payment is collected. Prefer email? Email us instead.

Shared by

Verified

Replacement clips for the Mini Cooper Sunshade accessory. These clips help hold the shades firmly in the window.

Published Jul 10, 2026Updated Jul 10, 2026

Originally published on thingiverse.com by Christopher Spooner (cmspooner) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Finding specific fitment/category matches first.