Superhero speaker adapters Ioniq
License & use
Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
Adapters to fit aftermarket speakers to the Hyundai Ioniq. Front and rear doors used 6.5" speakers 4Ohm. The woofer uses an 8" speaker 2x2Ohms. You need to print 4pcs of the door adapter and one woofer adapter. Do not forget to replace the tweeters too, they make a massive difference!! You need 4pcs of 5mm wood screws to fit the adapter to the woofer casing. They ned to be cut to a flat nose and in total 45-50mm long. Ikea got the exact right screws but I do not have the part number for those. (5x50mm hex) Add some sort of seal between the casing and adapter. PL400 or equivalent would do. Remember to add non-woven polyeter foam too before assembly. If you came this far I'm certain most of it is obvious already...:-).
Compatible Vehicles
Originally published on thingiverse.com by Henrik Torphammar (Henke2) · License: CC BY-NC-SA
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
