Supportless 2021 2022 Tesla Model 3 Y Rear Center Console Arm Rest Tray By Printer2261 - image

Files (1)

tesla_rearcenterconsoletray_logo.stl

STL

207.1 KB

Print plan

Exact totals not supplied

Print setup plan

Useful setup guidance without pretending STL byte size can predict filament, cost, or print time.

1 model file

Material plan

PETG / ASA

Published material guidance; still check heat, UV, load, and printer compatibility.

Starting setup

30% infill

A planning starting point only; wall count, orientation, and geometry often matter more than infill.

Final totals

Confirm in slicer

Slice the selected model with your final material, orientation, walls, and supports.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Reference shelf

Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon
ASA filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Unsure which one fits? Read the automotive filament guide.

Center Console

Supportless 2021 2022 Tesla Model 3 Y Rear Center Console Arm Rest Tray By Printer2261

0 downloads6 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

1 hosted model file

STL

Material start

PETG or ASA for durability in varying car conditions

Saved part guidance

Strength start

20-40% infill for a balance of strength and weight

Saved part guidance

Orientation / supports

supports unlikely

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

Safety/IP review

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

This model is originally from Tingiverse, made by Printer2261 also known as Shane Jackson. https://www.thingiverse.com/thing:5172136 But I thought that users of printables would also like to be able to print this, since the Tesla Model Y and 3 2021+ dont come with a tray anymore and those center console storage solutions are deep. Printer2261 wrote this about his model I made a supportless model of the center console tray. Fits 2021+ Tesla Model 3 and Model Y. There are two files: one has the Tesla logo and one is blank. I have added a gcode sliced in Prusaslicer 2.5 Alpha 2 to give a rough filament usages estimate and time estimate. I printed it using PLA, which should be good enough for most people, as it rarely gets over 60 degrees in the center console. I added ironing for the logo and the handles. I also used 3 perimeters but the sliced gcode has 2. You should be able to do less, but I normally prints with 3 perimeters and no vertical wall thickness. It is faster and prettier in most prints. The gcore I recommend you slice your own gcode.