Suzuki Jimny JB64/JB74 Phone Holder

0 downloads79 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

Source link only

No hosted model files

Material start

PETG or ASA for durability and heat resistance

Saved part guidance

Strength start

20-30% infill for a balance between strength and weight

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

High cabin heat — validate PETG or choose ASA/ABS

Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

Download at source

License & use

CC BY-NC

Link-only

Attribution required

Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

My Huawei P30 didn't fit in the storage area under the USB port when connecting to my JB74W Jimny for Android Auto as the phone was too long. I came up with a simple slot-together setup that hooks onto the front of the storage area and holds the phone nicely. To prevent movement of the phone or any tapping or rattling, I have since used the adhesive felt pads that you put under the feet of furniture, cut it up and attached it to any contact points. STP files included in case anyone needs to adjust the dimensions of the holder to match their phone. Prints nicely with 2x hooks and 1x bar at the same time. Enjoy!