tappo_panda.STL

STL

408.7 KB

tappo_panda_2.STL

STL

356.5 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Typical selected file

21g

Based on 25% main infill for the largest likely-needed model file

Material cost

$0.51

Filament only at roughly $24/kg PETG / ASA

Print time

36m–1.0h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
tappo_panda.STL	Printable file	408.7 KB STL	20g $0.47	21g $0.51	47g $1.12	Ensure a strong adhesion to the print bed to prevent warping
tappo_panda_2.STL	Printable file	356.5 KB STL	19g $0.45	20g $0.49	44g $1.07	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

tappo tergicristalli fiat panda

0 downloads13 views0 likes

Need this part printed?

Tell us what you need and we'll help you get it 3D printed. Takes a minute — no account needed and no payment is collected.

Opens a quick request form. No order is placed and no payment is collected. Prefer email? Email us instead.

Shared by

Verified

Fiat Panda 1986-2003 Tappo per la vaschetta dei tergicristalli - Cap for wipers watertank.

Published Jul 3, 2026Updated Jul 3, 2026

Originally published on thingiverse.com by Claudio Cirillo (Ciro3D) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Finding specific fitment/category matches first.