Taptes Model 3 (or Y) USB Hub Cover for Raspberry Pi 4
License & use
Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
Created an expanded cover for the Taptes Tesla Model 3 Usb Hub to fit a Raspberry Pi 4 inside. This is the hub: https://www.taptes.com/products/taptes-model-3-usb-hub-designed-for-tesla-model-3-dashcam-sentry-mode-model-3-hub A couple of the photos I added black flocking on it to match the interior look of the car and another couple of photos are just of the bare 3D printed part. IMPORTANT - 1. You will need to purchase 4x 5mm by 2mm round magnets (you probably can't buy just 4x because they are so cheap) 2. Your enclosure case on the Raspberry Pi 4 should not be more than 25mm thick. If you have a thicker case than this, contact me, I'll do a remix. But the case should be a just-fit within the hub because you don't want the Pi to rock around during driving. The case I'm using is this: https://www.amazon.com/dp/B07VD568FB/ref=cm_sw_r_tw_dp_U_x_UlMIEbYCS1C13
Compatible Vehicles
Originally published on thingiverse.com by Hilman Chung (chilman408) · License: CC BY-NC 4.0
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
