Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon
ASA filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Exterior

Tesla charge plug docking Type 2

0 downloads314 views0 quality score

License & use

CC BY

Commercial use allowed

Attribution required

Safety/IP review

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

Michael Chen

Verified

Description

I recommend printing the hanger clip (small part with two holes in it) at 98% scale. (2% reduction in xyz uniform direction). The dock it self should be printed at 100% scale. Cable management hanger for Tesla EV plug (Type 2). Plug should be inserted at an elevated angle and lowered to ensure proper locking into the internal latch. See pictures for reference. Update: added mkIII stl files. This one comes with a Tesla logo and less material usage overall. Note: I have not personally tried printing the mkIII version yet, so I'm unsure how well the internal hollowing will work with angles and bridging. Print with whatever settings you'd like. But, for best result, print at an 30 degree angle. The surfaces on model that should be at layer 1 is highlighted in the third picture attached to this thing. Supports needed in order to support the internal latch retaining the Type 2 EV plug in place. Bridging is not possible. I recommend no more than 5 to 10% infill as this model is quite large.