Files (4)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Slice the selected model with your final material, orientation, walls, and supports.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ABS filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ABS; use an enclosure and suitable ventilation, and verify temperature requirements and seller. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Tesla Jack pad case
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
4 hosted model files
STL
Material start
PETG or ABS
Saved part guidance
Strength start
90% infill around screw and nut connections, 15% infill elsewhere
Saved part guidance
Orientation / supports
verify in slicer, likely needed for top center
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
I got the idea from https://www.thingiverse.com/thing:3726158. It didn't fit my jack pads so I made a similar design using OpenSCAD. PETG or ABS is recommended since the print needs to be heat resistant. Jack Pads: I purchased from Ebay at https://www.ebay.com/itm/273710639030 Printing: Cutaway: Only for an example of internal detail.. Don't print this. Top: You may want supports for the center but it'll probably be OK without them. I used selective 90% infill around the screw connection but 15% infill elsewhere. Bottom: Supports not required. I used selective 90% infill around the nut pocket but 15% infill elsewhere. A 1/4-20 nut slides in the pocket to add threads. Knob: Supports not required. Holds a 1/4-20 x 1" bolt for tool free attachment of top cover. I used selective 90% infill around the bolt head but 15% infill elsewhere.
Compatible Cars
Originally published on thingiverse.com by Keith Welker (okcazure) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
