Files (2)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Tesla Mini Tissue Box Clip (Model S pre-facelift)
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
I needed a Tissue box clip in my Tesla Model S. This might work on other cars, but I don't know if it will. In my car, under the passenger side's glove box, there are two square openings that are about 60mm apart with large holes of almost 2cm each. If your car has a similar 6cm or so opening where you can slide a solid piece of 3mmx10mmx60mm stick into and the retainer will stay, then this might work for you. If not, you would have wasted some time. So check before you print this. If you can make suggestions on what works in your Model X or newer Model S or Model 3, leave me a message and I can try to make changes to see if it works for you. I printed this in ABS at 66% infill and it takes 6g (2.4m) of filament. --- Update: added a wider clip.
Compatible Vehicles
Originally published on thingiverse.com by Indy L (indyToronto) · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
