Tesla Model 3 Front Mud-Guards - Square Nuts + M3x10mm Screws

0 downloads73 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

Source link only

No hosted model files

Material start

PETG or ASA for durability and heat resistance

Saved part guidance

Strength start

20-30% infill for strength and flexibility

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

UV/weather exposure — ASA is the starting point

Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

Download at source

License & use

CC BY-NC-SA

Link-only

Attribution required

Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

Remixed "Tesla Model 3 Mud-guards front" by olkal https://www.thingiverse.com/thing:3900366. Use this original link to learn more about these mud-guards including installation instructions. I didn't have standard M3 hex nuts or M3x8mm screws available, so I remixed the design by (1) increasing the thickness of the "backplate" pieces by 2mm to accommodate M3x10mm screws and (2) modified the nut slots to accommodate M3 square nuts. There is plenty of gap between the wheel well liner and the body panel that these mud-guards clamp onto, so the added 2mm thickness to the backplate shouldn't be an issue. Worked for me! Also found at: https://www.prusaprinters.org/prints/37199-tesla-model-3-front-mud-guards-square-nuts-m3x10mm ☕ Fuel More Like This! ☕ If you liked this model and found it useful, please consider buying me a coffee to fuel creating and sharing more designs with the community: https://ko-fi.com/blaker9410 Thank you! -Blake.