Tesla Model 3 Jack Pad Set with Box
Files (5)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
William Moore (ROBOGAO)Designers selling from the US, Canada, the UK, the EU/EEA (except Iceland), Switzerland and Gibraltar can also list separate original designs for sale and receive 80% of the listing price, paid out by Stripe in your local currency (conversion fees may apply). Claiming credits you here; it doesn't put this imported part up for sale.
Description
This set of Tesla Model 3 Jack Pads has tabs that hold the Jackpad in the car frame while you maneuver your jack into position. It even has a compact box to hold a set of 4. Carry them with you and never worry about a mechanic punching a hole in your battery again! The Jackpads can be made with or without the tabs. If no tabs, then it can be printed flat without supports. If printed with tabs, its best to print on the side with supports so the tabs are stronger and can bend without breaking. The Jackpad Box requires two of the box halves to be printed. There are 3 options available that can be mixed and matched however you want. One file is unthreaded, one has 1/4-20 thread, and one has M6 thread. You can print two unthreaded halves and hold them together with a screw and a nut, or you can print one unthreaded and one threaded half and just need one 2 inch / 50 mm screw to hold it together. The threads print well on a well-tuned printer, but depending on your print quality you may need to run a tap through when done to clean it up. Print Settings: 100% Fill 3 Perimeters Material: PLA/ABS/PETG Printed with white Hatchbox PLA on Prusa i3 mk3. Designed in OpenSCAD.
Compatible Vehicles
Originally published on thingiverse.com by William Moore (ROBOGAO) · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Verified by drivers
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Comments (0)
Part lists
Ask the community about this part
Start a fitment, printing, or design discussion with this part already attached.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
