Tesla Model 3 Mud-guards front

3D printed Mud guards for the Tesla Model 3 front wheels. Installation is very easy and takes only a few minutes. No drilling or other modifications is required. Print the parts, remove any sharp edges, blobs or other imperfections and open up the hole for the push-in clip. Rub over the visble areas with a 3M Scotch Brite pad and plenty of water to obtain a nice matte finnish. 6 pc M3x8mm stainless screws (hex button head or hex socket head recommended), 6 pc stainless M3 nuts. Please note that the screw length must be exactly 8mm. Allan-key for the M3 screws and a flat screw-driver for the Tesla push-in rivet Clean the area thoroughly, there must be no sand or dirt between the paint and the printed parts.