Files (6)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Tesla_phone_stand_-_large_module.stl | Printable file | 165.8 KB STL | Slice file | Slice file | Slice file | Ensure a brim or raft is used for the small modules to prevent warping |
| Tesla_phone_stand_-_large_module_bracket.stl | Mount / bracket | 2.6 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
| Tesla_phone_stand_-_small_central_module.stl | Printable file | 94.1 KB STL | Slice file | Slice file | Slice file | Ensure a brim or raft is used for the small modules to prevent warping |
| Tesla_phone_stand_-_small_left_module.stl | Choose left variant | 127.9 KB STL | Slice file | Slice file | Slice file | Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing. |
| Tesla_phone_stand_-_small_module_bracket.stl | Mount / bracket | 1.8 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
| Tesla_phone_stand_-_small_right_module.stl | Choose right variant | 134.4 KB STL | Slice file | Slice file | Slice file | Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Tesla model 3 phone holder
Print this part
Check the available model and saved setup details before opening your slicer.
Files
6 hosted model files
STL
Material
PETG or ASA
Print time
Slice to calculate
Filament
Slice to calculate
Supports
verify in slicer
Infill
20-30% infill with 2-3 walls for durability
Difficulty
Not rated — inspect geometry
Vehicle heat
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
Simple smartphone holder for Tesla Model 3. Two pins allow the modules to be fixed in the grids between the ventilation and the white or wooden board. The long module allows me to attach my OnePlus 8 and can be easily shortened or lengthened by editing the.stl in your favorite software. The 3 small modules should allow you to fix most of your phones and tablets by spreading them more or less. (2mm at each step in the grid).
Compatible Cars
Originally published on thingiverse.com by Julien B&R (hekat) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Tesla Model 3 / Model Y Console Key Card Holder
Tesla Model 3 Tablet Iphone Mount Mod
Tesla model 3 box for holding sunglasses
Tesla model 3 licenseplate holder european version (Nummernschildhalter)
Tesla model 3 Magsafe Seat Hook
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
