Files (2)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Tesla Model 3 Phone mount - Note 9+ 10+ more
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
As a huge Waze fan, I needed a cradle to display Waze vertically in my line of sight. Commerical cradles wobble or use wonky suction cups. Version 1 was used for a full year with no problems other than being a bit fugly. I printed version 2 in ABS and PLA. PLA warped horribly inside of a week. The ABS stood up well for a week vacation in Flordia with cabin temps in the 140-150 F range though your mileage may vary over time. Version 3 is my final version. It's printed in PLA at 105% X axis, 105 Y axis, and 98% Z axis. To be safe, I printed at 100% density to reduce shrinkage, but this was probably overkill. You must anneal if using PLA or Tough PLA. Using a home convection oven, I heat up to 170 F, place prints on a ceramic tile in the bottom of the oven, heat for 1 hour, turn off the oven and let cool in the oven with door close for 3+ hours. The base holder attaches to the rear of the touch screen with velcro. The cradle is attached to the holder using 2 M4 -35mm bolts and 2 M4 wingnuts though tolerance is loose so a number of sizes will work. Once mounted, you can slide the cradle over the screen and tighten everything down to prevent movement. You can resize the cradle before printing to fit your phone. As is, this cradle supports a Galaxy Note 9+ and Note 10+. The 2 piece system allows for ideal placement.
Compatible Vehicles
Originally published on thingiverse.com by David Jones (VRPilot) · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
