Tesla Model 3 Trailer Hitch Cover 2020
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
Source link only
No hosted model files
Material start
PETG or ASA for durability and heat resistance
Saved part guidance
Strength start
20-30% infill for strength and minimal weight
Saved part guidance
Orientation / supports
verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
UV/weather exposure — ASA is the starting point
Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
tesla Model 3 2019 and 2020 years have a hatch that can be removed when adding a trailer hitch. This leaves a large hole. 2 options, cut your hatch and buy a new one when not using the hitch or print one. This fits around the Torklift 1 1/4 inch hitch. Model 7374. Unsure about 7373, but would most likely work on that one as well. This is a work in progress, it is not perfect, but it does cover the hole leaving minimal area open. I have included 3d printed 1/4 bolts. I am unsure if these will be strong enough. I am testing them now.
Compatible Cars
Originally published on thingiverse.com by Rick Cavanaugh (rickcavanaugh) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
