Tesla Model X No Drill Front License Plate Mount - image

Files (8)

Center_Bar_ModelX.stl

STL

56.1 KB

Center_Grill-Insert_ModelX.stl

STL

186.0 KB

Left_Bracket_FDM.stl

STL

123.9 KB

Left_Bracket_ModelX.stl

STL

270.4 KB

License_Holder_FDM.stl

STL

110.8 KB

License_Holder_ModelX.stl

STL

360.8 KB

Right_Bracket_FDM.stl

STL

123.9 KB

Right_Bracket_ModelX.stl

STL

270.4 KB

Print plan

Exact totals not supplied

Print setup plan

Useful setup guidance without pretending STL byte size can predict filament, cost, or print time.

8 model files

Material plan

PETG / ASA

Published material guidance; still check heat, UV, load, and printer compatibility.

Starting setup

25% infill

A planning starting point only; wall count, orientation, and geometry often matter more than infill.

Final totals

Confirm in slicer

Choose the needed variant, then slice it for grams, cost, and print time.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Reference shelf

Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon
ASA filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Unsure which one fits? Read the automotive filament guide.

Grilles

Tesla Model X No Drill Front License Plate Mount

0 downloads73 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

8 hosted model files

STL

Material start

PETG or ASA for durability in outdoor conditions

Saved part guidance

Strength start

20-30% infill for a balance between strength and weight

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

UV/weather exposure — ASA is the starting point

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

3D Printable mounting bracket for the Tesla Model X Front License Plate. It is designed to be inserted into the lower grill in the front (in the middle section of the lower grill). The reason it is designed in such a way is because the intended use is to get out of "Fix It" tickets. When you get a "Fix it" ticket for no front license plate. You set this up and slip it on the lower front grill. You show it to the cops and you pop it off once the cop signs your ticket. If you want to secure this to the front grill, there are holes in the bracket where you can add zip-ties to hold it together. Revision History: 10May2018 - Added 3 Files with *_FDM suffix that are meant to be easier for FDM printers to print.