Files (2)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Slice the selected model with your final material, orientation, walls, and supports.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
TomTom 600 / 6000 holder for Peugeot 108 / Aygo / C1
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
2 hosted model files
STL
Material start
PETG or ASA for durability in car conditions
Saved part guidance
Strength start
20-30% infill for a balance between strength and weight
Saved part guidance
Orientation / supports
verify in slicer, but likely not needed due to 30 degree angle design
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
High cabin heat — validate PETG or choose ASA/ABS
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
This is a holder for GPS devices of the TomTom 600 and 6000 series. The base is designed to fit into the spacing between the car radio and the upper vents and is arranged in a 30 degree angle to the casing because that one is angled - other wise the GPS wouldn't stand straight up. This way the base does actually stand without supports. I have fixed it to the using construction glue - the only stuff that does survive a nuclear blast and yet can be removed without destroying the stuff it's been holding:) It comes in silicone-like tubes, you'll find it at you local hardware store. There's also a sunshade included in the package - I accidently broke the left shade off realizing it was the best thing to do - otherwise the view towards the display from the drivers' seat would have been blocked. Therefore either remove the side shields in your software or carefuly break off the left / right side, depending on your location. The Shield does fit perfectly into the top sealing the GPS and fixing the shielding itself. The back features a lion logo and enables access to the USB plug. I might be adding a cover for it. The GPS devices' button is also accessible via the hole located at the back. I haven't tested it on the road yet, that's going to happen this week.
Compatible Cars
Originally published on thingiverse.com by Manuel Muessig (master2098) · License: CC BY-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
