Toyota Camry - Cup Holder (large) 2010 - image

Files (2)

Camrycup1.stl

STL

44.2 KB

camrycup2.stl

STL

37.6 KB

Print plan

Exact totals not supplied

Print setup plan

Useful setup guidance without pretending STL byte size can predict filament, cost, or print time.

2 model files

Material plan

PETG / ASA

Published material guidance; still check heat, UV, load, and printer compatibility.

Starting setup

25% infill

A planning starting point only; wall count, orientation, and geometry often matter more than infill.

Final totals

Confirm in slicer

Choose the needed variant, then slice it for grams, cost, and print time.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Reference shelf

Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon
ASA filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Unsure which one fits? Read the automotive filament guide.

Cup Holders

Toyota Camry - Cup Holder (large) 2010

0 downloads123 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

2 hosted model files

STL

Material start

PETG or ASA for durability and heat resistance

Saved part guidance

Strength start

20-30% infill for strength and flexibility

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

I designed a Toyota Camry (2007-10) cup holder to replace a missing middle part. The compartment for the cup holder is very shallow and asymmetric in design. My goal was to replace the missing (but spring loaded) OEM part with a device that could accommodate a large big-gulp cup. The cup holder I designed is in two parts; 1) A stand alone cup holder 2) A frame which fits into the cup holder to hold large cups firmly in place. The shallow cup holder was never designed to accommodate a large sized cup. The hinged cup holder box on the car made this design very difficult; the box is not square in any direction, and it has a hinge. http://www.ebay.com/itm/CENTER-CONSOLE-CUP-HOLDER-INSERT-DIVIDER-FOR-TOYOTA-CAMRY-2007-2011-BRAND-NEW-/272243556464?fits=Year%3A2010%7CMake%3AToyota%7CModel%3ACamry&hash=item3f62fb0070:g:NL0AAOSwve5XOAov&vxp=mtr http://www.ebay.com/itm/CUP-HOLDER-INSERT-DIVIDER-FOR-2007-2011-TOYOTA-CAMRY-CE-SE-XLE-LE-HYBRID-/201509450112?fits=Year%3A2010%7CMake%3AToyota%7CModel%3ACamry&hash=item2eeae63180:g:pFwAAOSwqrtWouBe&vxp=mtr