Files (1)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Toyota Celica (1994-1999) USB Plate
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
This is a plate to replace one of the blanking plates located near the cigar lighter in a 1994-1999 (gen 6) Toyota Celica. I found that with my cigarette to USB adapter plugged in the leads fouled the gear stick so wanted an alternative option. I didn't want to cut the existing blanking plates in case I wanted to remove the USB sockets. I purchased a 12V to dual USB adapter (https://www.amazon.co.uk/gp/product/B07F2XWKGK/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1) but found the provided fascia plate wasn't suitable (too bulky and not tight enough). I measured up the existing plate including the retaining clips and printed it out. unfortunately I wasn't able to fit the small pins on the side of the 12V adapter and so once the USB sockets were seated in the print, used a small amount of silicone adhesive to hold it in place. My first attempt at a custom 3D part, so forgive any minor errors. I don't believe the print to be too demanding and should work with most settings and materials.
Compatible Vehicles
Originally published on thingiverse.com by Chris Cousins (Cousins2007) · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
