Files (2)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Toyota GR Yaris Headrest Gopro Mount
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
The GR Yaris seat vibrates a bit, so you either need video stabilization which solves this very well or you can try to have a strap attached to the rear seat's ISOFIX, pulling on the seat back to stabilize it. ------- Print in direction as pictured above for maximum strength Print with __minimum four__ perimeters (walls) Use supports from building plate only ------- If the 3D printed mount is too hard to slide onto the headrest's mounting rods please slightly file down the ridges found inside the 3D printed mounting holes. They are there to make the mount sit tight on the rods. See picture above. There are also two holes with spaces for M4 nuts and screws. This is optional, to fasten the mount to the headrest 's two rods if it isn't as tight as it should be. If you use this don't overtighten!
Compatible Vehicles
Originally published on thingiverse.com by Magnus Thomé (MagnusT) · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
