Files (2)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Choose the needed variant, then slice it for grams, cost, and print time.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Toyota Seat Height Adjuster Knob (7259220040C0 ; 725922004003; 725922004004; 7259220040P0; 7259220040B0; 7259220040B7; 7259220040E3; 7259220040B8)
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
2 hosted model files
STL
Material start
PETG or ASA
Saved part guidance
Strength start
40-80% infill with 2-3 walls for durability
Saved part guidance
Orientation / supports
verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
A common part that is lost or broken on Toyota cars. Fits onto the splines on the driver's seat to adjust the height of the seat. Designed in Tinkercad Fits very snug onto the splines. I printed mine with 80% infill and 0.1mm layer height on my MonoPrice mini and it came out great, but lower resolution and infill should work. Part numbers it should replace: 7259220040C0; 725922004003; 725922004004; 7259220040P0; 7259220040B0; 7259220040B7; 7259220040E3; 7259220040B8 Vehicles it should fit on according to Toyota parts website: Toyota Camry 2.4L A/T LE 2002, 2003 Toyota Camry 2.4L A/T SE 2002, 2003 Toyota Camry 2.4L A/T XLE 2002, 2003 Toyota Camry 2.4L M/T LE 2002, 2003 Toyota Camry 2.4L M/T SE 2002, 2003 Toyota Camry 3.0L V6 A/T LE 2002, 2003 Toyota Camry 3.0L V6 A/T SE 2002, 2003 Toyota Camry 3.0L V6 A/T XLE 2002, 2003 Toyota Camry 3.0L V6 M/T LE 2002, 2003 Toyota Camry 3.0L V6 M/T SE 2002, 2003 Toyota Celica 1.8L A/T ST COUPE 1994, 1995, 1996, 1997 Toyota Celica 1.8L A/T ST Hatchback 1994, 1995, 1996, 1997 Toyota Celica 1.8L M/T ST COUPE 1994, 1995, 1996, 1997 Toyota Celica 1.8L M/T ST Hatchback 1994, 1995, 1996, 1997 Toyota Celica 2.2L A/T GT CONVERTIBLE 1995, 1996, 1997 Toyota Celica 2.2L A/T GT COUPE 1994, 1995, 1996 Toyota Celica 2.2L A/T GT Hatchback 1994, 1995, 1996, 1997 Toyota Celica 2.2L M/T GT CONVERTIBLE 1995, 1996, 1997 Toyota Celica 2.2L M/T GT COUPE 1994, 1995, 1996 Toyota Celica 2.2L M/T GT Hatchback 1994, 1995, 1996, 1997 Toyota Celica A/T GT 2000, 2001, 2002, 2003, 2004, 2005 Toyota Celica A/T GT CONVERTIBLE 1998, 1999 Toyota Celica A/T GT COUPE 1998 Toyota Celica A/T GT Hatchback 1998, 1999 Toyota Celica A/T GTS 2000, 2001, 2002, 2003, 2004, 2005 Toyota Celica M/T GT 2000, 2001, 2002, 2003, 2004, 2005 Toyota Celica M/T GT CONVERTIBLE 1998, 1999 Toyota Celica M/T GT COUPE 1998 Toyota Celica M/T GT Hatchback 1998, 1999 Toyota Celica M/T GTS 2000, 2001, 2002, 2003, 2004, 2005 Toyota MR2 Spyder Base 2000, 2001, 2002, 2003, 2004, 2005 Toyota Sienna AWD LE Mini Passenger Van 2004 Toyota Sienna AWD XLE Limited Mini Passenger Van 2004 Toyota Sienna AWD XLE Mini Passenger Van 2004 Toyota Sienna FWD CE Mini Cargo Van 2004 Toyota Sienna FWD CE Mini Passenger Van 2004 Toyota Sienna FWD LE Mini Passenger Van 2004 Toyota Sienna FWD XLE Limited Mini Passenger Van 2004 Toyota Sienna FWD XLE Mini Passenger Van 2004.
Compatible Cars
Originally published on thingiverse.com by Nick Robertson (nicholasrrobertson) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
