Files (1)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Toyota Tacoma Cup Holder
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
Toyota Tacoma Cup Holder - This is designed to fit into the existing cup holder on the center console on 2nd generation 2005-2015 Toyota Tacomas (may fit newer versions but have not verified). I found the stock cup holder to be too small for most cups. I originally designed this to fit a Yeti tumbler, but found that it fit a lot of other cups too. I made a cutout in the rear for cups with handles as well, and placed it at an angle so the handle can be picked up from the side. I did not show all the cups it will fit, but I know it will also hold most fast food medium cups and soda cans too. Of course there will be many larger cups that will not fit, but the Tacoma front cup holders do a good job for those larger sizes. Also, note that I put two indexing marks on the front and back sides of the Tacoma Cup Holder, so that it can be aligned with the slope of the console. The indexing tabs are to be facing directly forward and rearward. The tapered fit should be just tight enough to lock the cup holder in place when pushed all the way down.
Compatible Vehicles
Originally published on thingiverse.com by Scott Hartley (motoyoyo) · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
