Files (8)

5_Speed_NoNut.stl

STL

1.1 MB

5_Speed_Nut.stl

STL

974.7 KB

7_Speed_NoNut.stl

STL

1.2 MB

7_Speed_Nut.stl

STL

1.1 MB

Knob_finished_no_nut.stl

STL

1.6 MB

Knob_finished_Nut.stl

STL

1.6 MB

Knob_smooth_no_tree_no_nut.stl

STL

1.4 MB

Knob_smooth_nut_no_tree_.stl

STL

1.4 MB

Print plan

Exact totals not supplied

Print setup plan

Useful setup guidance without pretending STL byte size can predict filament, cost, or print time.

8 model files

Material plan

PETG / ASA

Published material guidance; still check heat, UV, load, and printer compatibility.

Starting setup

25% infill

A planning starting point only; wall count, orientation, and geometry often matter more than infill.

Final totals

Confirm in slicer

Choose the needed variant, then slice it for grams, cost, and print time.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Reference shelf

Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon
ASA filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Unsure which one fits? Read the automotive filament guide.

Knobs/Buttons

Toyota Tacoma Manual Shift Knob

0 downloads64 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

8 hosted model files

STL

Material start

PETG or ASA for durability and heat resistance

Saved part guidance

Strength start

20-30% infill for a balance between weight and strength

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

My Toyota Tacoma shifter got scratched up and the leather peeled away. It looked ugly, but most importantly the 6-speed tree illustration was no longer visible for people who occasionally drive my truck and can't find reverse. I bought a replacement "ball" knob, and hated the way it felt. It was uncomfortable and only after a few months, the tree illustration faded away. I also really missed the contours of the original shift knob as it fit my hand well and was comfortable for long drives. I couldn't find an affordable replacement option so I had to get creative. I grabbed the tattered remains of the original knob and carefully scanned it with my Kinect Xbox360 scanner, then tweaked the mesh in Meshmixer. Then I imported it into Fusion360 fiddled around with it some and here we are. Enjoy! I had an ordinary M12 x 1.25 hex nut that fit the shift stick, and made a version to accept one if you prefer having a metal-on-metal connection. Just run your slicer, and pause at the last layer height for the nut cavity. Drop a standard M12 x 1.25 hex nut inside, and resume the print. You may need to trim any plastic lip with a small blade to get it to fit properly, but it should have allowable tolerances. I've uploaded a few versions. *6 Speed Knob* *6 Speed Knob + Nut cavity* *Smooth Knob* *Smooth Knob + Nut cavity* *Update!* Looks like there are other gear trees out there for the Tacoma and perhaps other vehicles. I added a few more: *5 Speed knob* *5 Speed knob + Nut cavity* *7 Speed knob* *7 Speed knob + Nut cavity* Feel free to tweak and customize. I added CAD files. I'd love to see your pics or remixes!