Toyota Tundra beverage holder inserts - image

Files (1)

Tundra_bev_holder_gasket_V1a_11-20-17.stl

STL

754.0 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Saved filament data plus editable planning inputs for cost and time.

1 model file

Recommended kit

50g

Based on 20% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg TPU

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

Toyota Tundra beverage holder inserts

0 downloads217 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

1 hosted model file

STL

Material start

TPU

Saved part guidance

Strength start

20% or adjusted based on desired stiffness

Saved part guidance

Orientation / supports

Likely not needed

Exact totals

50 g · 2 hours

Saved estimate

Vehicle exposure

Flexible material; verify heat and load

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

Michael Chen

Verified

Description

Replacement beverage holder inserts for 2004 Toyota Tundra (and perhaps other models). Using flexible filament is mandatory I printed these with YOYI TPU at 10-20 mm/s, 75 degree bed, 135 degree nozzle, 20% infill. Adjust the infill as a function of how stiff you'd like the "fingers" to be. 20% is a tad stiff at colder temperatures.

Compatible Cars

Toyota (all models)

Published Mar 8, 2026Updated Aug 9, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Hyundai

4.5K

View & download STL files