Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Two Gauge In Radio Mount BMW E36
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
1 hosted model file
STL
Material start
PETG or ASA for durability in a car environment
Saved part guidance
Strength start
20-30% infill for strength and moderate weight
Saved part guidance
Orientation / supports
Likely not needed
Exact totals
50 g · 2 hours
Saved estimate
Vehicle exposure
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
Michael ChenDescription
Two aftermarket gauges mount in DIN radio place. --- EDIT 16.06.22 --- I test fit previous version and it doesn't fit in the radio hole, and gauge doesn't fit into the plate xD Yes, I'm dumb. Therefore I decided to design whole thing from scratch. It was easier and now everything fits like shod. Gauges are tight fit. I designed this for two gauges, because in my seat, wheel and hand position I don't see the left side of radio. I add 15 degrees of tilt for better clear look. This part fits in normal DIN radio slot in BMW E36. I use this radio delete plate: https://www.thingiverse.com/thing:3800660 as base plate, and add side hinges from this project: https://www.thingiverse.com/thing:3531481 I make a stiffer walls for strength. I cut this in Cura to two separate prints like in the picture. It's not possible to print without support by design. In this settings It's prints much quicker. After print you may glue parts in one piece by superglue or simply put everything together with gauges. In my situation it holds by friction.
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
compact 52mm Airvent for BMW e36
BMW E36
BMW E36 Cupholder
BMW E36
A-pillar trim Clip for BMW E36 vehicles
BMW E36
BMW e36 Center Vent Gauge
BMW E36
Cup holder for BMW E36
BMW E36
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
