USB Port for Empty Switch Port - Toyota Highlander 2013 - image

Files (1)

USB_Port_A.stl

STL

1014.9 KB

Print plan

Exact totals not supplied

Print setup plan

Useful setup guidance without pretending STL byte size can predict filament, cost, or print time.

1 model file

Material plan

ABS / ASA

Published material guidance; still check heat, UV, load, and printer compatibility.

Starting setup

18% infill

A planning starting point only; wall count, orientation, and geometry often matter more than infill.

Final totals

Confirm in slicer

Slice the selected model with your final material, orientation, walls, and supports.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Reference shelf

Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
ASA filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability.	Check price at Amazon
ABS filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ABS; use an enclosure and suitable ventilation, and verify temperature requirements and seller.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Unsure which one fits? Read the automotive filament guide.

USB Port for Empty Switch Port - Toyota Highlander 2013

0 downloads14 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

1 hosted model file

STL

Material start

ABS or ASA for durability in vehicle conditions

Saved part guidance

Strength start

15-20% infill for strength and minimal weight

Saved part guidance

Orientation / supports

supports likely, verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Higher-heat material; verify location and load

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

A friend of mine wanted me to make this for his 2013 Toyota Highlander, so this should work for similar highlanders and models in general. Printed in two pieces to help lock the USB port into place. I tried to make it parametric but I'm not the greatest at that lol. Printed on a Qidi X-Max 2 Print Settings Printer Brand: QIDI Rafts: No Supports: Yes Resolution:.2 Infill: 15% Filament: GizmoDorks ABS Black Notes: I would recommend printing this in ABS, ASA, or something with a similar glass transition point, as it's going into a vehicle Category: Automotive.