Vantrue N4 rear cam mount VW Passat - image

Files (2)

VantrueRearMount_v8.step

STEP

43.3 KB

VantrueRearMount_v8.stl

STL

4.8 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Recommended kit

20g

Based on 25% main infill across listed model files

Material cost

$0.47

Filament only at roughly $24/kg PETG / ASA

Print time

34m–56m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
VantrueRearMount_v8.step	Mount / bracket	43.3 KB STEP	10g $0.23	11g $0.26	23g $0.56	Ensure a strong adhesion to the print bed to prevent warping.
VantrueRearMount_v8.stl	Mount / bracket	4.8 KB STL	8g $0.20	9g $0.22	20g $0.47	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Vantrue N4 rear cam mount VW Passat

0 downloads45 views0 likes

Shared by

Alfred

Verified

Description

This is a mount for the Vantrue n4 Rear Dashcam. This is highly inspired by the design from alexktz which can be found here. If you want to use it you have to be careful when attaching the mount to the roof of the car, as the mount snaps easily. (Sorry for my bad english, i'm not a native speaker)