Volkswagen Beetle Fuse Box Cover 10 Post - image

Files (1)

VW_Bug_Fuse_Box_Cover_10_Post.stl

STL

2.9 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
VW_Bug_Fuse_Box_Cover_10_Post.stl	Cover / cap	2.9 MB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and supports unlikely.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Volkswagen Beetle Fuse Box Cover 10 Post

0 downloads83 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

1 hosted model file

STL

Material

PETG or ASA

Print time

Slice to calculate

Filament

Slice to calculate

Supports

supports unlikely

Infill

20-30% infill for a balance between durability and weight

Difficulty

Not rated — inspect geometry

Vehicle heat

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

This is a 10 post fuse box cover for VW Bug. I made it for my 1967 bug. It is a friction fit piece just like the original. I designed the long walls to be curved so that it does not need the little nubs on the lip to hold it in the fuse box; the curved walls hold it snug. I painted mine to match the color of the car. I made it with PETG so that it can withstand the heat inside the car on sunny days. Print with numbers side down without supports.