Files (1)
Based on 10% main infill across listed model files
Filament only at roughly $24/kg TPU / flexible filament
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Volkswagen Body Plug 1K0 899 185 replacement
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
1 hosted model file
STL
Material start
TPU or flexible filament
Saved part guidance
Strength start
10% infill for flexibility, adjust based on filament brand
Saved part guidance
Orientation / supports
Likely not needed
Exact totals
50 g · 2 hours
Saved estimate
Vehicle exposure
Flexible material; verify heat and load
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
Michael ChenDescription
Replacement body plug for several Volkswagen models, VW part nummer is 1K0 899 185. I had to use 10% infill to get it bit more soft with Hobby King flexible, it depends on the filament brand.
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
